Bathymetry estimate from altimetry

Dense satellite altimeter measurements can be used in combination with sparse measurements of seafloor depth to construct a uniform resolution map of the seafloor topography. These maps do not have sufficient accuracy and resolution to be used for assessing navigational hazards, but they are useful for such diverse applications as locating obstructions/constrictions to the major ocean currents and shallow seamounts where fish and lobster are abundant. Detailed bathymetry also reveals plate boundaries and oceanic plateaus.


Bathymetry can be computed using altimetry together with other data
(Credits Cnes).See Interface 3D

A detailed knowledge of topography is fundamental to the understanding of most Earth processes. In the oceans, detailed bathymetry is essential for understanding physical oceanography, biology and marine geology. Currents and tides are controlled by the overall shapes of the ocean basins, as well as by the smaller, sharp ocean ridges and seamounts. Sea life is abundant where rapid changes in ocean depth deflect nutrient-rich water toward the surface. Because erosion and sedimentation rates are low in the deep oceans, detailed bathymetry also reveals mantle convection patterns, plate boundaries, the cooling/subsidence of the oceanic lithosphere, oceanic plateaus and the distribution of off-ridge volcanoes.

Since it is impossible to map the topography of the ocean basins directly from Space, most seafloor mapping is a tedious process that is carried out by research vessels equipped with echo sounders. However, completely mapping the ocean basins at a horizontal resolution of 100 m would take about 125 ship-years of survey time using the latest technology, with highly non-uniform data. Thus, until recently, our knowledge of the seafloor topography was poor.

The free surface of the ocean deforms by tens of meters in places as a result of gravity differences caused by the relief of the seafloor and uneven mass distribution within the Earth's crust. Altimetry measurements, whose electromagnetic waves do not penetrate in-depth, is thus able to measure the sea-surface deformation due to the undulating bottom topography.

Radar altimeters aboard the ERS-1 and Geosat spacecraft have surveyed the marine gravity field over nearly all of the world's oceans with high accuracy and moderate spatial resolution. In March 1995, ERS-1 completed its dense (~8 km track spacing at the equator) mapping of sea surface topography between the latitudes of 81.5° North and South. These data have been combined and processed to form a global marine geoid or gravity grid [Cazenave et al., 1996; Sandwell and Smith, 1997]. In the wavelength band 15 to 200 km, gravity anomaly variations are highly correlated with seafloor topography and thus, in principle, can be used to recover topography.

Gravity anomalies (left), computed from altimetry, and predicted topography (right) deduced from these gravity anomalies plus in situ measurements. (Credits Noaa/Scripps Institution of Oceanography)

The basic theory for predicting seafloor topography from satellite altimeter measurements is summarised in a paper by Dixon et al. [1983]. The conceptual approach uses the sparse depth soundings to constrain the long-wavelength depth while the shorter-wavelength topography is predicted from the downward-continued satellite gravity measurements [Smith and Sandwell, 1994]. There are a number of complications that require careful treatment, e.g.:

  • computing bathymetry from gravity anomalies is only possible over a limited wavelength band,
  • longer wavelengths in this band are highly dependent on the elastic thickness of the lithosphere and/or crustal thickness,
  • sediments favour filling bathymetric lows and can eventually completely bury the pre-existing basement topography.
Bathymetry computed near Madagascar. Near Comoros Island, between Africa and Madagascar, and east of this island (the Mascarene ridge) the undersea mounts are very specific. (Credits Legos/CNRS).

References :

  • Cazenave, A., P. Schaeffer, M. Bergé, and C. Brossier, High-resolution mean sea-surface computed with altimeter data of ERS-1 (Geodetic mission) and Topex/Poseidon, Geophys. J. Int., 125, 696-704, 1996.
  • Dixon, T. H., M. Naraghi, M.K. McNutt, and S.M. Smith, Bathymetric prediction from Seasat altimeter data. J. Geophys. Res. 88, 1563-1571, 1983.
  • Smith, W.H.F., and D.T. Sandwell, Bathymetric prediction from dense satellite altimetry and sparse shipboard bathymetry. J. Geophys. Res. 99, 21,803-21,824, 1994.
  • Smith, W.H.F., and D.T. Sandwell, Global sea floor topography from satellite altimetry and ship depth soundings. Science 277, 1956-1961, 1997.

Further information :

EnglishFrançaisEspañol
Rss feedsContactSitemapPartnersFAQGlossaryLexicon
You must enable cookies in your browser preferences to save the modifications
You are using an older version of Internet Explorer, please update to take full advantage of Aviso+ features

Customize the home page

View all widgets
Reduce display
Public profile
User profile

Select/Deselect widgets

Discover AVISO+

Customizable home, reading tools, products search guide, etc.. Discover step by step the features of the new site AVISO+.

Customizable homepage

The new home page is composed of blocks called "widgets".

Rearrange the blocks with a "Click & Drop".

Hide a widget with the cross at the top right. Reset or add a widget with the "wrench" icon. The "User" and "Public" profiles offer a predefined organization.

All the modifications are automatically saved as cookies on your machine so as to enable you to have your own specific AVISO+.

Reading tools

Ease your reading by choosing the page background colour (black/white) and/or by modifying the font size.

Browsing menu and breadcrum trail

To ease your browsing through AVISO+, you can use at any time the main banner items with the interactive submenus or use the browsing menu on the left side of the screen (it is open by default). For more readiness of the page contents, you can fold and unfold the browsing menu by clicking on the tab. At any time you can know where you are thanks to the browsing menu or the breadcrum at the top of the page.

Products search guide

The first submenu of the "Data" banner item leads you to a new search form enabling you to find quickier the product that suits your needs. The list of results is updated according to your selection criteria.

AVISO+ Multimedia

The first submenu of the "Multimedia" banner item leads you to AVISO+ collections of images and videos linked to altimetry and its applications. Have a nice visit!